Product ID:1602,FLAT BLACK,37078,SPRAY PAINT
MSDS Date:01/01/1985
FSC:8010
NIIN:00-054-1950
MSDS Number: BCWGT

KRYLON DEPT.,DIV OF BORDEN CHEM.,BORDEN INC.

630 E WASHINGTON
NORRISTOWN, PA 19404
US

Cage: JO900

KRYLON PRODUCTS

SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 32%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 10 - 20%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 20%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 18%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 4%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:LIGHTHEADEDNESS,DIZZY,HEADACHE,FATIGUE,MUSCULAR
WEAKNESS,MENTAL CONFUSION,NAUSEA,INSOMNIA

First Aid:REMOVE TO FRESH AIR.IF SPRAYED IN EYES,FLUSH WITH WATER.

Extinguishing Media:DRY CHEM.
Fire Fighting Procedures:NORMAL CLASS B FIRE PROCEDURES.
Unusual Fire/Explosion Hazard:IF SPRAYED WITHIN 12 IN. OF OPEN FLAME
SPRAY MAY IGNITE & BURN LIKE A BLOWTORCH

Spill Release Procedures:REMOVE SOURCES OF IGNITION.SOAK UP WITH
ABSORBENT MATERIAL.VENTILATE AREA.MATERIAL NOT DANGEROUS WHEN
SOLVENTS HAVE EVAPORATED.(MFG)

Handling and Storage Precautions:DO NOT STORE OVER 120F.DO NOT PLACE
CAN ON RADIATOR,STOVE,DIRECT SUNLIGHT OR NEAR OTHER HEAT SOURCES.
Other Precautions:DO NOT PUNCTURE OR INCINERATE CONTAINER.DO NOT BREATH
FUMES.USE AIR PACK TO AVOID PYROLYSIS PRODUCT.

Respiratory Protection:VENTILATE ADEQUATELY
Ventilation:AS NEEDED TO KEEP AREA BELOW ESTIMATED TLV
Supplemental Safety and Health
CONTAINER IS UNDER INTERN PRESS OF ABOUT 60 LBS PSIG AT 70F. ADD
INGRED: METHANOL,<4%,200PPM;CARBON BLACK;SILICA;ACRYLIC ESTER
RESIN;CHLORINATED RUBBER;BUTYL BENZYL PHTHALATE.

HCC:V3
Vapor Density:>1.0
Spec Gravity:<1.0
Evaporation Rate & Reference:>1.0 (BU AC)
Solubility in Water:SLIGHT
Percent Volatiles by Volume:88

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE TOXIC &
IRRITATING CHLORINE COMPOUNDS

Waste Disposal Methods:WHEN DRY DISPOSE OF BY INCINERATION OR LANDFILL
IN ACCORDANCE WITH ALL LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.